27, "This test is designed to quickly determine if a drive is functioning correctly. If you are having problems and this diagnostic passes, run the Full Diagnostic."
28, "Performs all of the quick tests as well as a more exhaustive analysis of each selected hard drive."
29, "Test Status"
30, " "
31, " "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
32, " "
33, " "
34, " "
35, " "
36, " "
37, " "
38, " "
39, " "
40, "File &Structure Test"
41, " "
42, " "
43, " "
44, " "
45, " "
46, " "
47, " "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
48, " "
49, "&View Report"
50, "Please wait while loading document."
51, "readme.txt"
52, "license.txt"
53, "seagate.log"
54, " "
55, " "
56, " "
57, " "
58, " "
59, "&Cancel"
60, "&OK"
61, "Retry"
62, "&Yes"
63, "&No"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
64, "&Abort"
65, "&Help"
66, "&Back"
67, "&Next"
68, "&Cancel"
69, "&Stop"
70, "&Done"
71, "E&xit"
72, "&Help"
73, "E&xit"
74, "No results are available for this item."
75, " "
76, "Error"
77, "Quick Help"
78, "Drive selection quick help"
79, "Summary quick help"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
80, "Help System"
81, "Help Topic"
82, "HELP TEXT"
83, "Running Test %i: %s"
84, "Testing Drive 1:"
85, "FAT 16"
86, "FAT 12"
87, "FAT 32"
88, "NTFS"
89, "Dynamic Disk"
90, "Unknown"
91, "BIOS Drive"
92, "SeaTools Desktop"
93, "&About SeaTools Desktop"
94, "E&xit"
95, "&Help"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
96, "Help Topics"
97, "Primary Master"
98, "Primary Slave"
99, "Secondary Master"
100, "Secondary Slave"
101, "Primary Master (PCI)"
102, "Primary Slave (PCI)"
103, "Secondary Master (PCI)"
104, "Secondary Slave (PCI)"
105, "Insert diskette"
106, "Selected Drive:\t"
107, "System &Memory Test"
108, "&SMART Status Check"
109, "&90 Second Test"
110, "&File Structure"
111, " "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
112, "System memory error"
113, "System Memory"
114, "SMART Check"
115, "90-Second"
116, "File Structure"
117, "Surface Scan"
118, "Testing Status"
119, "Current Test"
120, "Select 'Skip' to skip current diagnostic, or 'Cancel' to cancel remaining diagnostic(s)."
121, "Device %d of %d"
122, "No Label"
123, "- Writes and reads back data patterns in Random Access Memory. The test ensures your system memory is OK."
124, "System &Memory Test"
125, "Reads the Self-Monitoring, Analysis, and Reporting Technology status of the selected drives. SMART equipped hard disc drives offer early warning of failures that could lead to data loss."
126, "SMART Status Check"
127, " "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
128, " "
129, "Examines FAT and NTFS file system partitions, volumes, directories, and files. The test determines if there are data file structure errors in any FAT / NTFS partitions or volumes."
130, "File Structure Test"
131, " "
132, " "
133, " "
134, " "
135, "*** PROBLEM(S) ENCOUNTERED ***"
136, "NO PROBLEMS FOUND"
137, "No Problems Found\r\nIt appears that your ATA or SCSI disc drive is physically functioning as it should but you are advised to run the full test to fully determine the status of your drive. If you need further help, our Technical Support department will be happy to help. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
138, "No Problems Found\r\nIt appears that your ATA or SCSI disc drive is physically functioning as it should. If you need further help, our Technical Support department will be happy to help. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
139, "*** PROBLEMS ENCOUNTERED ***\r\nIt appears that your ATA or SCSI drive was unable to complete all of the selected tests OR has one or more problems. These problems may or may not be with the drive itself. Please click on the \"View Detailed Report\" Button below for more information."
140, "*** PROBLEMS ENCOUNTERED ***\r\nIt appears that your ATA or SCSI drive was unable to complete all of the selected tests OR has one or more problems. These problems may or may not be with the drive itself. Please click on the \"VIEW DETAILED REPORT\" Button below for more information. \r\n\r\nIf you need further help, our Technical Support department will be happy to help. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
141, "No Problems Found\r\nIt appears that your ATA or SCSI disc drive is physically functioning as it should. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
142, "No Problems Found\r\nIt appears that your ATA or SCSI disc drive is physically functioning as it should. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
143, "Drive: "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
144, "Printing in Progress..."
145, "An error occurred while printing the document. Check to make sure all printer cables are attached properly and that your printer is turned on.\r\n\r\nClick 'Retry' to try again or 'Cancel' to cancel printing."
146, "Your printer may be out of paper. Please re-load your paper tray and click 'Retry' to continue or click 'Cancel' to abort printing."
147, "Print Error"
148, "Print"
149, "Save to Floppy"
150, "Saving in Progress..."
151, "A file with the same name currently exists on the destination. Press \"Yes\" to overwrite it, press \"No\" to append the results, press \"Cancel\" and the results log will not be saved."
152, "An error occured trying to save the file to the disk. Please make sure that the disk is in the drive and not write protected and try again."
153, "Always OVERWRITE unused sectors."
154, "Scanning sectors..."
155, "Found bad sector: %-12d "
156, "BAD Sector LBA: "
157, "Not in use"
158, "Used in the directory / folder: "
159, "Used in the file: "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
160, "This sector is used by the drive's MBR\r\n (Master Boot record). Some or all of the partitions\r\n on this drive may be inaccessible."
161, "This sector is used by a BPB\r\n on the drive, and may cause a partition to be inaccessible."
162, "This sector is used by the a BPB backup\r\n on the drive."
163, "This sector is used by a File Allocation Table (FAT)\r\n This may cause files to appear corrupted, or entire directories / folders \r\n to appear missing."
164, "This sector is used by the Root Directory.\r\n This may cause the majority of the files and folders on \r\n this partition to appear missing."
165, "This sector is in use by the Dynamic MBR.\r\n If this drive contains your operating system, it may not be bootable.\r\n The computer may also crash / hang during startup because of this problem."
166, "This sector is in use by the\r\n Drive Overlay software's code.\r\n If this drive contains your operating system, it may not be bootable.\r\n The computer may also crash / hang during startup because of this problem."
167, "This sector is in use by the NTFS\r\n Master File Table (MFT). This may cause files to appear corrupted\r\n and/or missing. If this drive contains your operating system,\r\n this problem could lead to system crashes or the inability to startup."
168, "Unable to resolve sector usage."
169, "\r\n If this is a directory, any contained files or subdirectories \r\n may be inaccessible.\r\n"
170, "A bad sector has been found, but it is not in use. SeaTools can try to write to these sectors in an attempt to see if the drive can automatically replace them. \r\n\r\nAttempt to overwrite the unused sector?"
171, "\r\nAttempting to write to the sector... FAILED"
172, "\r\nAttempting to write to the sector... SUCCEEDED!"
173, "SeaTools was unable to write to the sector. If this drive is still under warranty, you can stop scanning, and the drive can be sent in for replacement. Otherwise you can continue, to have the drive attempt to relocate other bad sectors.\r\n\r\n Continue?"
184, "This controller is unable to properly communicate with the drives that are attached to it. This could be due to a bad connection, cable or controller. SeaTools may be unable to continue testing. Check the cables and connections for the following drives:\r\n"
185, "Select the test(s) that you would like to run on the selected drive(s). These tests can help you determine if there is a physical problem with your drive. Note: running a \"Full Diagnostic\" can take a considerable amount of time. For more information, click \"Help\"."
186, "Diagnostic Details"
187, "System Memory Test:\r\n===================\r\nWrites and reads back data patterns in Random Access Memory. The test ensures your system memory is OK. If this test fails, no other tests should be attempted.\r\n\r\nQuick Test\r\n===========\r\nThe Quick Test is comprised of a number of tests that are run automatically (if applicable). These are:\r\n\r\n - Seagate Quick Test:\r\nA fast diagnostic provided by DiagATA/SCSI to quickly check the health of a drive\r\n\r\n - SMART Status Check:\r\nReads the Self-Monitoring, Analysis, and Reporting Technology (SMART) status of the selected drives. SMART equipped hard disc drives offer early warning of failures that could lead to data loss.\r\n\r\n - 90-Second Test:\r\nVerifies with 90% accuracy the physical integrity of the media where the data is stored. Test is performed based on the geometry of the drive, and is completed within 90 seconds.\r\n\r\n"
188, "Printing and Saving Reports"
189, "SeaTools allows you to save generated reports to a floppy disc or print it.\r\n\r\nSaving - Generated reports are not automatically saved. When you are viewing a report you have the option to save this file to a floppy disc.\r\n\r\nPrinting - Reports can be printed to a printer that is connected via the parallel port. \r\n"
190, "Bad LBA Scan"
191, "This scan will search through your drive attempting to locate bad sectors. It will then determine what type of data (if any) resides on those sectors. If the bad sector contains a file or directory, you may be unable to access its contents. \r\n\r\nIf the sector is not in use, you'll be prompted to allow SeaTools to attempt to overwrite this sector. Doing so may cause the drive to correct the problem. If this scan encounters a number of bad LBAs, it is recommended that you backup your data as soon as possible.\r\n"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
192, "Diagnostic testing in progress. For more information, click on the \"Help\" button."
193, "Diagnostic testing in progress. For more information, click on the \"Help\" button."
194, "Scanning for and attempting to replace bad sectors. For more information, click on the \"Help\" button."
195, "Keyboard Navigation"
196, "You can access all SeaTools controls using only the keyboard.\r\n\r\nUse the Tab key to switch between controls, i.e. buttons, check boxes, list boxes, tab controls.\r\n\r\nUse the arrow keys to select items in a list or to switch between tabs in a tab control.\r\n\r\nItems in a list can be selected using the spacebar/enter keys.\r\n\r\nYou can quickly select certain controls by using a hot key. This is done by pressing the Alt key followed by a letter. The letter assigned to a selection will be underlined in that item's description. Alt-N and Alt-B are assigned to the 'Next' and 'Back' buttons.\r\n\r\nTree controls can be navigated using the arrow keys, spacebar to check/uncheck and the '+' key to expand a tree item. To view drive information on an item in the tree, arrow to it and press 'i'."
197, "Select the drive(s) and the type of test you would like to run. For more information about the tests click on the \"Help\" button. "
198, "Select the drive(s) that you would like to test. For more information about the tests click on the \"Help\" button. "
199, "Seagate Diagnostics"
200, "SeaTools allows you to perform Seagate diagnostic tests on Seagate hard disc drives. If you are not able to see your drive in the list, verify that its cables are properly attached and that the BIOS is able to see the drive.\r\n\r\nTwo types of tests are available, a Quick Diagnostic and a Full Diagnostic.\r\n\r\nThe Quick Diagnostic will take about 90 seconds for each hard disc drive. This test is designed to quickly determine if a drive is functioning correctly. If you are having problems and this diagnostic passes, run the full diagnostic test.\r\n\r\nThe Full Diagnostic performs the Quick Diagnostic as well as a more exhaustive analysis of your hard drive and can take a considerable amount of time to run."
201, " "
202, " "
203, "Interpreting Diagnostic Results"
204, " "
205, " "
206, " "
207, "Performing Complete Surface Scan of drive: "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
208, "*** TEST(S) SKIPPED ***\r\n\r\nAt least one test was skipped. To view the results of the tests that completed, click on the \"VIEW DETAILED REPORT\" button."
209, "*** TEST(S) NOT SUPPORTED ***\r\n\r\nAt least one test was not supported. To view the full results and determine which test(s) did not complete or were unsupported, please click on the \"VIEW DETAILED REPORT\" button."
210, "At least one test was SKIPPED"
211, "At least one test was UNSUPPORTED"
212, "Scan Completed... NO PROBLEMS FOUND"
213, "Scan Completed... PROBLEMS FOUND"
214, "Many times, these errors may be repaired through normal system maintenance. If you are experiencing a hardware error, you should isolate the cause and replace the failing component. After completing any maintenance tasks, run SeaTools again to verify that all errors have been repaired. If errors continue to occur, the system may not be stable. "
215, "Unable to locate any hard disc drives in your system. Please verify all cable attachments and BIOS settings."
216, "RMA Form"
217, "If your Seagate hard disc drive is under warranty:\r\n\r\nIf the drive is functioning well enough to be visible to SeaTools, run both the quick and full tests. If the drive fails the Full test, view the detailed report for the drive on the \"Results\" screen. Please print this report or save it to a floppy to be printed on another computer.\r\n\r\nThe SeaTools Desktop diskette/CD contains a RMA form (rma.txt). This file contains instructions on what do do next."
218, "Undetermined file or directory path"
219, "System Analysis Failure. Error "
220, "SeaTools was unable to analyze your system's hardware and therefore cannot continue."
221, "There were no hard disc drives detected."
222, " "
223, " "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
224, " "
225, " "
226, "*** PROBLEMS ENCOUNTERED ***\r\nIt appears that your ATA or SCSI drive was unable to complete all of the selected tests OR has one or more problems. These problems may or may not be with the drive itself. Please click on the \"VIEW DETAILED REPORT\" Button below for more information. \r\n\r\nIt is highly recommended that you run the the Full Seagate Diagnostic which can help you determine which files reside on damaged areas of the drive.\r\n\r\nIf you need further help, our Technical Support department will be happy to help. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
227, "Select a drive to test"
228, "Unknown"
229, "No Label"
230, "Unknown Drive Type"
231, "FAT12"
232, "FAT16"
233, "FAT32"
234, "NTFS"
235, "%d Bytes"
236, "Intel 80386 or equivalent"
237, "Intel 80486 or equivalent"
238, "Intel Pentium or equivalent"
239, "Select the diagnostic tests you wish to perform"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
240, "System Memory Test"
241, "- Writes and reads back data patterns in Random Access Memory. The test ensures your system memory is OK."
242, "Quick Drive Diagnostic"
243, "- Quickly determines the overall status of the disc drive."
244, "Full Drive Diagnostic"
245, "- Runs a complete scan and attempts to reallocate problem sectors on the disc drive (Note: this may take a considerable amount of time)."
246, "File Structure Test"
247, "- Examines FAT and NTFS partition, volume, directory, and file information. The test determines if there are data file structure errors in any partitions or volumes."
248, "Controller Test"
249, "- Determines that there is communication between your drive(s) and controller."
279, "\r\n\r\nS.M.A.R.T., (S)elf (M)onitoring (A)nalysis and (R)eporting "
280, "(T)echnology, a built-in hard disk drive failure prediction method "
281, "reports an 'Alert' if a problem has occurred. It reports 'Passed' "
282, "if no problems are found and 'Unsupported' if a hard disk drive "
283, "does not support S.M.A.R.T.\r\n"
284, " Invalid BPB"
285, " Extended partition table invalid"
286, " Invalid MBR\r\n"
287, " Invalid secondary MBR\r\n"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
288, " Invalid media descriptor"
289, "\r\nIO Channel type "
290, "ISA"
291, "\r\n\r\nUse of the diagnostic and this information is controlled by the license agreement included with the SeaTools software product. Any use for commercial or financial gain, including but not limited to, use in performing technical, consulting or data recovery services is prohibited without the prior written approval of Kroll Ontrack Inc.\r\n"
302, "\r\n\r\nPARTITION CYLINDER SIZE\r\n---------- ------------ ----\r\n # Type Start End MB"
303, "\r\nPartition Check Results:"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
304, "\r\n %-2d %-7s %-5lu %-5lu %-7lu"
305, "\r\n Not Checked. Unsupported (or Unknown) Partition"
306, " Partition "
307, " Result: "
308, "Passed"
309, "Passed with Minor Error(s)"
310, "\r\nPassword-protected"
311, "PCI"
312, "PM"
313, "\r\n PRIMARY"
314, "\r\nProcessor "
315, "\r\nRecommendation:\r\n"
316, " Sector "
317, "If you are not experiencing data loss and SeaTools reports File \r\nSystem Structure errors, they may be caused by a lock-up or \r\nfailure to shutdown Windows correctly. Many times, these errors\r\nmay be repaired through normal system maintenance which\r\nincludes using the Windows provided \"Defrag\" and\r\n\"Scandisk / Chkdsk / Error Checking\" utilities.\r\n\r\nIf you are experiencing a hardware error, you should isolate\r\nthe cause and replace the failing component. If you are unsure how\r\nto proceed with repairs, contact a computer professional. After\r\ncompleting any maintenance tasks, run SeaTools again to\r\nverify that all errors have been repaired. If errors continue to\r\noccur, the system may not be stable. Again, contact a computer \r\nprofessional.\r\n\r\n"
318, "All selected physical diagnostics passed.\r\n\r\n"
319, "If you have experienced a data loss, cease drive operation \r\nimmediately. Professional data recovery service is the best \r\noption to recover your data.\r\n"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
320, " "
321, "\r\n"
322, "A physical problem has been detected, please run the Full Diagnostic scan.\r\n\r\n"
323, "Skipped"
324, "Alert"
325, " SMART Status Check Result: "
326, " File Structure Test Result: "
327, " Full Diagnostic Scan Result: "
328, "\r\n\r\nSystem Information:"
329, "\r\n %s Result: %s"
330, "SeaTools Desktop"
331, "\r\nV"
332, " "
333, "\r\nReport file created "
334, "\r\n\r\nThe following information has been generated by SeaTools Desktop. Use\r\nthis information to help you recognize and resolve potential data access\r\nproblems.\r\n"
335, "Unsupported"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
336, " (Unknown or unsupported partition(s) skipped)\r\n"
337, "\r\n %u KBytes in "
338, "%u files"
339, "Scanning for drives..."
340, "For maximum performance, the mouse has been disabled. To cancel the scan, press \"Alt-C\", otherwise wait for the scan to complete. Press the \"Help\" button for more information."
341, "Open"
342, "Close"
343, "Back"
344, "Bad sector(s) have been found. SeaTools works with the drive's built-in defect management system to activate blank replacement sectors. It does this simply by writing zeros to a sector already known to be unreadable. However, doing so will erase the contents of the bad sectors and may prevent professional data recovery possibilities.\r\n\r\nAttempt to replace the bad sectors? If you are unsure, consult the help option and/or click \"Replace None\"."
345, "Always overwrite sectors that may be in use?"
346, "Passed"
347, "Passed with inconsistencies"
348, "Failed with critical Errors"
349, "Loading file system records..."
350, "Checking file system for errors..."
351, "Full Diagnostic:\r\n==========\r\nA full diagnostic involves a complete surface scan of the disc drive. This test may take a considerable amount of time. If bad sectors are found during this test on a Seagate drive, SeaTools will use Ontrack's LBA2File technology to determine how (or if) the bad sectors are in use.\r\n\r\nFile Structure Test:\r\n====================\r\nExamines the partition, volume, directory, and file information. This test runs only on partitions with the FAT and NTFS file system. It determines if there are data file structure errors in any partitions or volumes. If this test fails, and all other tests complete successfully, it is unlikely that there is anything physically wrong with the drive.\r\n\r\nController Test:\r\n================\r\nDetermines if the controller is able to correctly communicate with the drives attached to it. This test is only supported for the \"legacy\" primary and secondary PATA channels."
359, "Motherboard Primary/Secondary IDE Controller"
360, "Parallel ATA Controller %d"
361, "Serial ATA Controller %d"
362, "SCSI Controller ID=%d"
363, "Unknown Controller"
364, "Other Seagate Drives"
365, "My Computer"
366, "N/A"
367, "SN: "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
368, "&Select Tests"
369, "&Controller Test"
370, "Quick Test"
371, "Full Test"
372, "Item %d of %d"
373, "Partition %d %s"
374, "Testing Item: "
375, "System Memory Test"
376, "Writes and reads back data patterns in Random Access Memory. The test ensures your system memory is OK."
377, "Full Surface Scan"
378, "Scans the entire surface of your drive. If numerous errors occur, you may want to cancel the test, unplug the drive and seek professional data recovery assistance."
379, "Full Surface Scan: Resolving Bad Sector Usage"
380, "SeaTools is determining what data (if any) is contained by the damaged sectors..."
381, "90 Second Test"
382, "This test reads from thousands of random locations on the drive for 90 seconds."
383, "SMART Status Check"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
384, "This test determines if the Self Monitoring Analysis and Reporting Technology error threshold has been reached for this drive."
385, "File System Scan"
386, "The File System Scan will examine all of the selected FAT and NTFS partitions on this drive. "
387, "Seagate Quick Test"
388, "Performing a quick test of the disc drive..."
389, "Seagate Full Test"
390, "Performing a full scan of the disc drive... If any bad sectors are found, SeaTools will attempt to determine if any of your data resides on these sectors. This test can be canceled at any time by holding down Alt-S"
391, "Controller Test"
392, "This test will determine if the communication between your drives and this controller is functioning correctly."
393, "mycomp.log"
394, "mboard.log"
395, "pata_%X.log"
396, "sata_%X.log"
397, "scsi_%X.log"
398, "drv_%X.log"
399, "otherdrv.log"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
400, " The Following Sectors MAY be damaged\r\n ------------------------------------\r\n"
401, "Not Tested"
402, "Select All"
403, "Deselect All"
404, "View Drive Info"
405, "Close"
406, "No report is available for this item."
407, "IDE Information"
408, "Translation Information"
409, "Hard Drive Information"
410, "This information, is accessed by right clicking on a drive in the storage explorer tree and selecting \"View Drive Info\" (or, using the keyboard press 'i' when the drive is highlighted). It shows the data returned from an Identify Device command (supported by all current drives) issued to the selected drive.\r\n\r\nThe data is divided into IDE Information and Translation Information, each shown on a separate tab. The Drive Model and Serial Number are shown at the top of the page.\r\n\r\n\r\nThe IDE Information tab contains the following information:\r\n\r\nSize\r\n----\r\nLBA Sectors: The total number of user addressable sectors found on this drive, and the equivalent size.\r\n\r\nCHS: This is the translated Cylinder, Head, and Sector values, and drive size they represent."
411, "\r\n\r\nDMA\r\n----\r\nMW DMA Support: The MW DMA (Multi-Word Direct Memory Access) modes supported by this drive.\r\n\r\nMW DMA Active: The current MW DMA mode that is active.\r\n\r\nMW DMA Cycle Time: The cycle time, in nanoseconds recommended by the manufacturer for this drive.\r\n\r\nMin Cycle/Word: The minimum time in nanoseconds that this drive supports.\r\n\r\nUltraDMA Support: The Ultra DMA modes supported by this drive.\r\n\r\nUltraDMA Active: If the interface supports UDMA, the rate at which the drive is enabled.\r\n\r\nMisc\r\n----\r\nFirmware Rev.: The firmware revision of the drive.\r\n\r\nS.M.A.R.T. Support: Indicates whether the drive supports S.M.A.R.T. error monitoring and if it is currently enabled in the drive."
412, "\r\n\r\nATA-#: The ATA numbers shown indicate the AT Attachment standard that determine the physical, electrical, transport, and command protocols that this hard drive has been designed to comply with. The higher the number, typically the newer the drive and higher level of standards this drive supports. Values shown from ATA-2 to ATA-5 are accurate, ATA-6 and higher are based on flags reserved for ATA 6 and higher, but are unconfirmed at this time.\r\n\r\nR/W Multiple: \"YES\" indicates this drive supports Read/Write Multiple commands.\r\n\r\nSectors/Block: The maximum number of sectors per block for Read/Write Multiple commands."
413, "\r\n\r\nPIO Mode Support: The data transfer modes supported that are performed by the host processor utilizing PIO register accesses to the Data register and Not DMA.\r\n\r\nPIO Cycle Time: If the drive supports IOReady flow control this field shows the minimum transfer time using IOReady, or the minimum transfer time without flow control.\r\n\r\n\r\nThe Translation Information tab contains the following information:\r\n\r\nMBR Partition Table\r\n------------------\r\nThe MBR partition table shows, for the selected drive, the four partition table entries. For each partition table entry, the following information is displayed.\r\n\r\nType: The partition type. Type 4, 6 or E indicate FAT16, type 7 indicates NTFS, type B or C indicate FAT32, type 5 or F indicate an extended partition."
414, "\r\n\r\nBootable: Indicates if the partition is an active partition.\r\n\r\nBegin CHS: The CHS value of the beginning of the partition. For a primary partition, this is the location of the BPB. For an extended partition, this is the location of the extended MBR (XMBR).\r\n\r\nEnd CHS: The CHS value of the end of the partition.\r\n\r\nSize: The size of the partition in KB/MB/GB.\r\n\r\nTranslation\r\n----------\r\n\r\nThe Translation information shows the Cylinders, Heads and Sectors/Track information for the drive.\r\n"
415, "Drive Model"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
416, "Serial Number"
417, "CHS"
418, "LBA Sectors"
419, "Drive Model"
420, "Firmware Rev."
421, "Drive Version"
422, "SCSI ID"
423, "Vendor"
424, "Int 13 Drive Number"
425, "SCSI Version"
426, "S.M.A.R.T. Support"
427, "Adaptor ID"
428, "Adaptor Parameters"
429, "Adaptor Model"
430, "SCSI Manager"
431, "IDE Information"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
432, "Translation Information"
433, "Delta"
434, "Enabled"
435, "Disabled"
436, "None"
437, "sectors"
438, "Firmware Rev."
439, "Serial Number"
440, "S.M.A.R.T. Support"
441, "CHS"
442, "= Size:"
443, "LBA Sectors"
444, "XBIOS Supported"
445, "ATA-# Supported"
446, "IORDY Support"
447, "R/W Multiple"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
448, "Sectors/Block"
449, "MW DMA Support"
450, "MW DMA Active"
451, "MW DMA CycleTime"
452, "Min. Cycle/Word"
453, "UltraDMA Support"
454, "UltraDMA Active"
455, "PIO Mode Support"
456, "PIO Cycle Time"
457, "Perform Drive Self Test (DST)? Choose Yes to allow the drive to test itself, choose No to test the drive through the computer."
458, "SMART threshold flag is set! This is a prediction of drive failure. Please backup your data. Would you like to continue testing?"
459, "Warning - Although no problems were detected with your drive, CRC Errors were \tdetected during data transfer. These types of errors are often caused by poor cables or connections."
460, "Warning - Although no problems were detected with your drive, Compare Errors were detected during data transfer. These types of errors are often caused by poor cables or connections."
461, "Starting File System Scanning Engine..."
462, "Results from Seagate's DiagATA/SCSI:"
463, " *** NO SEAGATE LOG AVAILABLE ***"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
464, "Seagate DiagATA Quick Test Result: "
465, "ATA Full Test Result: "
466, "Seagate DiagSCSI Quick Test Result: "
467, "SCSI Full Test Result: "
468, "-----------------------------------------------------------------\r\nEnd results from Seagate's DiagATA/SCSI"
469, "Seagate diagnostic error code: %Xh Consult the User Guide for more info."
470, "Resolving Sector/LBA: %d"
471, " LBA: %-12d\r\n STATUS: %s\r\n USAGE: %s"
472, "Not Resolved"
473, "Unresolvable"
474, "Replace &All"
475, "Replace &None"
476, "Bad Sector LBA: %-10d "
477, "*** In Use ***"
478, "Not In Use"
479, "Usage Unknown"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
480, " (Double click for more information)"
481, "Usage: "
482, "Path: "
483, "The following sectors are bad:"
484, "Attempting to replace sector: %d "
485, "SeaTools was unable to replace at least one bad sector on the drive. For more information, please view the detailed log file for this drive."
486, "Overwrite SUCCESSFUL!"
487, "Overwrite FAILED"
488, "Overwrite SKIPPED"
489, "For more information, select an item then click the \"View Report\" button."
490, "No tests have been run..."
491, "Basic Controller Test Result: "
492, "Your system memory may be going BAD! Bad system memory can lead to unexpected crashes, data loss, data corruption, and other unusual behavior. It is highly recommended that you contact your PCs manufacturer to further diagnose this problem."
493, "Due to these communications problems, it is not possible to accurately determine if your drive itself is functioning properly. If possible, shutdown the system, reattach the drive using a different cable and channel and run this test again."
494, "&Diagnostics"
495, "&Results"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
496, "&User Guide"
497, "Attempting to replace bad sectors..."
498, "SeaTools Desktop is attempting to replace the bad sectors using write-reallocation."
499, "Sector Information"
500, "Select the item(s) to diagnose from the Storage Explorer below"
501, "At least one test PASSED with inconsistencies"
502, " Recommendation:\r\n The \"Quick Test\" is adequate for most situations.\r\n Consider running the \"Full Test\" which\r\n verifies each sector on the drive if you need to run a more\r\n comprehensive diagnostic."
503, " At least one bad sector was found during the surface scan\r\n of this drive and all such sectors were successfully\r\n reallocated by SeaTools. However, any content in these\r\n individual sectors could not be retrieved and possible file\r\n system errors may still be present. Please review the\r\n information below for more details."
504, "*** XMBR ERROR ***"
505, " ID=%d"
506, "For drive information, right click on a physical drive or tab/arrow to it and press 'i'"
507, "NO DISC DRIVES FOUND!!!"
508, "This utility can only diagnose problems with hard drives that are recognized by your system. If your drive is not recognized by your system, shut down now and check the following:\r\n\r\n - All power and interface cable connections are correct.\r\n - All drive jumpers (i.e. SCSI ID, SCSI-Termination, SCSI-Termination\r\n Power, ATA-Master, ATA-Slave) are set correctly.\r\n - System BIOS (Host Bus Adapter for SCSI) is configured correctly."
509, "If your drive is not recognized by the system, shut down and check the following:\r\n\r\n - All power and interface cable connections are correct.\r\n - All drive jumpers are set correctly.\r\n - System BIOS is configured correctly.\r\n\r\nCertain disc drive/file system problems can cause SeaTools to take a number of minutes to load, please be patient."
510, " NOTE: Any report of possible errors in the file system tests are for\r\n informational purposes only. We suggest you should consider testing with \r\n the official file system diagnostic utilities for your operating system.\r\n Seagate is not able to assist with troubleshooting or reviewing\r\n file system test results."
